Categories
Coat Kit
$12
1
Save this product for later
Coat Kit
Product Details
This kit will include everything you need to re coat or touch up your ski poles.
Instructions:
- Sand your poles so the entire surface has been lightly roughed up and chips/flakes have been removed or sanded down. Wipe the poles clean of dust and dirt with water and allow to dry completely.
- Work in a well-ventilated area! Put on protective gloves and apply the clear coat with the supplied foam brush in a thin layer avoiding runs and drips.
- Allow to dry for about 2-3 hours at room temperature. If the temperature of your space is below 65 degrees, a ventilated bathroom works great too. Dry until your fingerprint no longer transfers to the clear coat, and no clear coat transfers to your finger (about 2-3 hours)
- Additional coats can then be applied as above. We apply 3 coats, but 1-2 should be fine for a touch-up.
Powered by Lightspeed
Display prices in:USD
